تفاعل #4372

معادلة التفاعل

sodium carbonate

ethyl vinyl ether

1-chlorobutan-2,3-dione-2-oxime

→

title compound

المردود 98.0%

1-[5,6-Dihydro-6-ethoxy-1,2(4H)-oxazin-3-yl]ethanone

المردود 98.0%

ظروف التفاعل

المعالجة

1. 1
   أخرىA 1000 ml three-neck flask equipped with a mechanical stirrer, a reflux condenser, and a nitrogen inlet adapter
2. 2
   درجة الحرارةwas heat
3. 3
   أخرىdried
4. 4
   workup.ADDITIONcharged with nitrogen
5. 5
   أخرىwas at room temperature
6. 6
   ترشيحThe reaction mixture was filtered
7. 7
   غسيلthe solid cake rinsed with diethyl ether
8. 8
   أخرىthe combined filtrate and rinses were evaporated under reduced pressure (bath temperature maintained at <40° C.)

الإجراء التجريبي

A 1000 ml three-neck flask equipped with a mechanical stirrer, a reflux condenser, and a nitrogen inlet adapter was heat dried and charged with nitrogen. When the flask was at room temperature, it was loaded in order: 39.5 g (0.37 mole) of anhydrous sodium carbonate; (with stirring) 132 g (1.83 mole) of ethyl vinyl ether; and (portionwise over a period of 7 minutes) 10.0 g (0.074 mole) of 1-chlorobutan-2,3-dione-2-oxime [Oglobin et al., J. Gen. Chem. U.S.S.R. 34, 2710 (1964)]. Stirring was continued for 21 hours. The reaction mixture was filtered, the solid cake rinsed with diethyl ether, and the combined filtrate and rinses were evaporated under reduced pressure (bath temperature maintained at <40° C.). There was obtained 12.4 g (98%) of the title compound as an oil; nmr spectroscopy indicated it to be essentially 100% pure. This procedure is essentially that described by T. L. Gilchrist, G. M. Iskander and A. K. Yagoub (J. Chem. Soc., Chem. Commun. 1981, 696-698).

المصدر