تفاعل #417902

معادلة التفاعل

p-tert-Butoxystyrene

cyclohexyl acrylate

2,2′-azobisisobutyronitrile

→

p-tert-butoxystyrene cyclohexyl acrylate

المذيبات

isopropanol

methanol

ظروف التفاعل

المعالجة

1. 1
   أخرىa polymerization reaction at 75° C. for 6 hours
2. 2
   درجة الحرارةThe reaction solution was cooled
3. 3
   ترشيحThe precipitated crystal was collected by filtration
4. 4
   غسيلwashed with methanol
5. 5
   أخرىdried under reduced pressure

الإجراء التجريبي

p-tert-Butoxystyrene (176.3 g (1.0 mol)) and 16.2 g (0.105 mol) of cyclohexyl acrylate were dissolved in 250 ml of isopropanol, and in a nitrogen stream, 2,2′-azobisisobutyronitrile was added. The mixture was allowed to undergo a polymerization reaction at 75° C. for 6 hours. The reaction solution was cooled and then poured in 5,000 ml of methanol for crystallization. The precipitated crystal was collected by filtration, washed with methanol and dried under reduced pressure to obtain 172.5 g of poly(p-tert-butoxystyrene/cyclohexyl acrylate) as white powder crystal. The component ratio between p-tert-butoxystyrene unit and cyclohexyl acrylate unit in the obtained resin was found to be about 90:10 from 1HNMR and 13CNMR measurements. Also, the results of GPC measurement using polystyrene as a standard were Mw of about 20,600 and Mw/Mn of 1.55.

المصدر