تفاعل #362825

معادلة التفاعل

potassium iodide

sodium nitrite

hydrochloric acid

3-methylthioaniline

→

3-iodo-1-methylthiobenzene

المذيبات

water

water

water

ظروف التفاعل

المعالجة

1. 1
   درجة الحرارةThe mixture is warmed
2. 2
   workup.DISSOLUTIONdissolution
3. 3
   workup.ADDITIONare subsequently added slowly
4. 4
   درجة الحرارةwhile maintaining the temperature between 5 and 8° C
5. 5
   أخرى20 min
6. 6
   workup.ADDITIONare added over a period of 10 min
7. 7
   workup.STIRRINGthe mixture is then stirred at room temperature for 15 h
8. 8
   أخرىThe oil which forms is separated from the aqueous phase by decantation
9. 9
   workup.ADDITIONan aqueous solution of sodium thiosulphate is then added to it
10. 10
    أخرىThe aqueous phase is decanted
11. 11
    استخلاصthe product is extracted with 100 ml of dichloromethane
12. 12
    غسيلThe organic phase is washed with 100 ml of water
13. 13
    أخرىseparated off
14. 14
    غسيلThe organic phase is washed with 2 times 100 ml of water
15. 15
    أخرىseparated off
16. 16
    تجفيفdried over magnesium sulphate
17. 17
    ترشيحfiltered
18. 18
    تركيزconcentrated to dryness under reduced pressure (50 kPa) at 40° C
19. 19
    أخرىThe resulting product is purified by flash chromatography (eluent, cyclohexane) in order

الإجراء التجريبي

20 ml of distilled water and 20 ml of 12 N hydrochloric acid are placed, with stirring, in a three-necked flask, and 10 ml of 3-methylthioaniline are then added using a dropping funnel. The mixture is warmed to ensure dissolution and is then cooled down to 5° C. 5.86 g of sodium nitrite dissolved in 15 ml of water are subsequently added slowly, using a dropping funnel, while maintaining the temperature between 5 and 8° C. 20 min after having completed the addition, 13.57 g of potassium iodide dissolved in 15 ml of water are added over a period of 10 min and the mixture is then stirred at room temperature for 15 h. The oil which forms is separated from the aqueous phase by decantation, and an aqueous solution of sodium thiosulphate is then added to it. The aqueous phase is decanted and the product is extracted with 100 ml of dichloromethane. The organic phase is washed with 100 ml of water, and the aqueous phase is adjusted to pH 9 with concentrated sodium hydroxide solution, and then separated off. The organic phase is washed with 2 times 100 ml of water, separated off, dried over magnesium sulphate, filtered and then concentrated to dryness under reduced pressure (50 kPa) at 40° C. The resulting product is purified by flash chromatography (eluent, cyclohexane) in order to yield 13 g of 3-iodo-1-methylthiobenzene in the form of a yellow liquid (Merck Silica 5719, Rf=0.8/cyclohexane).

المصدر