تفاعل #2161226
ord-a741321d2508435db1bf42b9deb2c052
معادلة التفاعل
الكواشف
ظروف التفاعل
المعالجة
- 1أخرىas obtained in step 2) above and
- 2درجة الحرارةThe mixture was refluxed for 72 hours
- 3أخرىAfter a return to ambient temperature, the solvent was evaporated off under reduced pressure
- 4ترشيحthe manganese salts were eliminated by filtration over celite
- 5أخرىThe liquid filtrate was evaporated
- 6workup.DISSOLUTIONthe residue was subsequently dissolved in 100 ml of ethanol
- 7غسيلwashed with 3×100 ml of water in order
- 8أخرىAfter evaporation
- 9workup.DISSOLUTIONthe residue was dissolved in chloroform
- 10غسيلwashed with a saturated aqueous solution of sodium chloride (3×100 ml) in order
- 11غسيلfinally washed with 2×100 ml of water in order
- 12تجفيفThe organic phase was subsequently dried over sodium sulfate
- 13أخرىthe solvent was evaporated off
- 14استخلاصDuring the first extraction with ethanol and water as solvents
- 15أخرىa part of the porphyrin precipitated
- 16ترشيحThis precipitate was filtered off
- 17workup.DISSOLUTIONIt was subsequently redissolved in chloroform so that it
- 18workup.ADDITIONcould be added to the organic phase during the washing with sodium chloride
الإجراء التجريبي
A solution of 5.5 g (27.8 mmol) of manganese chloride tetrahydrate (MnCl2.4H2O) in 160 ml of DMF was added portionwise to a solution of 1 g (1.4 mmol) of porphyrin TEPP (2) as obtained in step 2) above and dissolved in 200 ml of DMF. The mixture was refluxed for 72 hours. After a return to ambient temperature, the solvent was evaporated off under reduced pressure. The residue was taken up in 50 ml of chloroform and the manganese salts were eliminated by filtration over celite. The liquid filtrate was evaporated and the residue was subsequently dissolved in 100 ml of ethanol and washed with 3×100 ml of water in order to eliminate the TBAF. After evaporation, the residue was dissolved in chloroform and this organic phase was in turn washed with a saturated aqueous solution of sodium chloride (3×100 ml) in order to be sure that the axial ligand of the manganese is a chlorine, and finally washed with 2×100 ml of water in order to eliminate the traces of sodium chloride. The organic phase was subsequently dried over sodium sulfate and the solvent was evaporated off. During the first extraction with ethanol and water as solvents, a part of the porphyrin precipitated. This precipitate was filtered off and kept. It was subsequently redissolved in chloroform so that it could be added to the organic phase during the washing with sodium chloride. 700 mg (0.88 mmol; yield 63%) of manganese tetrakis(4-ethynylphenyl)porphyrin (MnCl-TEPP) (5) were obtained in the form of a purple/black-colored powder which is green in solution in chloroform.