تفاعل #1483028
ord-f9cec99d73cc4a519afec4881f3e363f
معادلة التفاعل
الكواشف
المذيبات
ظروف التفاعل
المعالجة
- 1أخرىA 1 L, round-bottom, three neck flask equipped with: a mechanical stirrer
- 2أخرىwas placed in a water bath
- 3workup.ADDITIONThe following reagents were subsequently charged to the flask with
- 4أخرىreached 60° C.
- 5درجة الحرارةmaintained at 65° C.)
- 6أخرىto exceed 75° C
- 7workup.ADDITIONthe addition
- 8workup.STIRRINGthe mixture was stirred
- 9درجة الحرارةheated to 70° C. for another 4 h
- 10درجة الحرارةthe mixture cooled over night to room temperature
- 11أخرىThe white crystals that separated from the mixture
- 12ترشيحwere filtered off
- 13غسيلwashed with 2×10 mL of ice-cold toluene and vacuum
- 14أخرىdried at 50° C.
الإجراء التجريبي
A 1 L, round-bottom, three neck flask equipped with: a mechanical stirrer, a thermometer and a 125 mL dropping funnel with pressure equilibration was placed in a water bath maintained at 65° C. The following reagents were subsequently charged to the flask with an efficient stirring: 250 mL of dry toluene, 2.5 mL of concentrated sulfuric acid and 207 g of well ground, solid 3,5-dichlorosalicylic acid, which forms a mobile suspension. When the temperature of this constantly stirred mixture reached 60° C. (with the water bath temperature maintained at 65° C.) a drop-wise addition of 108 g (100 mL) of acetic anhydride was initiated and completed within 30 min. During the acetic anhydride addition the temperature of the reaction mixture was not allowed to exceed 75° C. After completing the addition, the mixture was stirred and heated to 70° C. for another 4 h. After this time, the agitation was stopped and the mixture cooled over night to room temperature. The white crystals that separated from the mixture were filtered off, washed with 2×10 mL of ice-cold toluene and vacuum dried at 50° C. to yield 206 g (82.7% yield) of 2-acetoxy-3,5-dichlorobenzoic acid. An additional 30.6 g (12.3%% yield) of the product was recovered by: concentrating the filtrate to ½ of the original volume, cooling the solution in an ice-water bath, filtering off the crystalline product and vacuum drying it at 50° C.