تفاعل #1375815
ord-a38a23bfc67943b0ab8dd6e927b402ff
معادلة التفاعل
المتفاعلات
الكواشف
ظروف التفاعل
المعالجة
- 1أخرىIt is evaporated to dryness
- 2استخلاصextracted twice with 100 ml of tert-butyl methyl ether
- 3أخرىevaporated to dryness
- 4استخلاص(extracted) with 200 ml of methanol/80 ml of methylene chloride
- 5درجة الحرارةIt is cooled in an ice bath
- 6أخرىprecipitated potassium chloride
- 7ترشيحis filtered out
- 8تركيزThe filtrate is concentrated by evaporation in a vacuum
- 9workup.DISSOLUTIONthe residue is dissolved in 45 ml of water/20 ml of ethanol
- 10غسيلThe product is eluted with a solution of ethanol/water 1:3
- 11تركيزAfter concentration
- 12أخرىby evaporation in a vacuum
- 13أخرىthe residue is chromatographed on a reversed-phase column (RP 18/mobile solvent =gradient of water/tetrahydrofuran)
- 14تركيزAfter concentration
- 15أخرىby evaporation of the main fraction, 10.38 g (77% of theory) of a greatly hygroscopic, vitreous solid
- 16أخرىis obtained
الإجراء التجريبي
7.63 g (86.58 mmol) of glycidyl methyl ether and 10 g (28.86 mmol) of 1,4,7-triscarboxymethyl-1,4,7,10-tetraazacyclododecane are dissolved in a mixture of 50 ml of dioxane/80 ml of water, and the pH is brought to 10 with 6 N potassium hydroxide solution. It is stirred for 24 hours at 50° C. It is evaporated to dryness, the residue is taken up with 300 ml of water/50 ml of methanol and extracted twice with 100 ml of tert-butyl methyl ether. The aqueous solution is adjusted to pH 1 with 5 N hydrochloric acid and evaporated to dryness. The residue is boiled out (extracted) with 200 ml of methanol/80 ml of methylene chloride. It is cooled in an ice bath and precipitated potassium chloride is filtered out. The filtrate is concentrated by evaporation in a vacuum, the residue is dissolved in 45 ml of water/20 ml of ethanol and then put on a column of poly-(4-vinylpyridine). The product is eluted with a solution of ethanol/water 1:3. After concentration by evaporation in a vacuum, the residue is chromatographed on a reversed-phase column (RP 18/mobile solvent =gradient of water/tetrahydrofuran). After concentration by evaporation of the main fraction, 10.38 g (77% of theory) of a greatly hygroscopic, vitreous solid is obtained.