تفاعل #1005935
ord-8af60de8b2a3497a8e63739b1e4a231b
معادلة التفاعل
الكواشف
ظروف التفاعل
المعالجة
- 1أخرىhas been lowered to 0° C.
- 2workup.STIRRINGStirring
- 3workup.STIRRINGwhile stirring
- 4أخرىA strongly exothermic reaction
- 5workup.STIRRINGStirring
- 6workup.WAITwas continued for 10 min
- 7درجة الحرارةwithout cooling
- 8workup.STIRRINGwhile stirring
- 9workup.STIRRINGStirring
- 10workup.WAITwas continued for 2 d at 4° C
- 11workup.WAITwas continued for 1 h at ambient temperature
- 12استخلاصextracted thrice with 150 ml diethyl ether each, the combined extracts
- 13غسيلwere washed twice with 80 ml of water each, then once with 40 ml saturated aqueous sodium chloride solution
- 14تجفيفdried with sodium sulfate
- 15تركيزconcentrated in vacuo
- 16أخرىYield 48.6 g oil, which have been purified by chromatography on 300 g silica gel with hexane/MTBE (10:1)
الإجراء التجريبي
To 156.9 ml (156.9 mmol) of a 1 molar solution of lithium-aluminum-hydride in THF 0.77 g (14.3 mmol) sodium methylate have been added and the temperature has been lowered to 0° C. afterwards. Then a solution of 10.0 g (142.7 mmol) 2-butin-1-ol in 108 ml THF has been added dropwise with stirring at this temperature. Stirring was continued for 36 h at 4° C. Thereafter, at about 0° C., 28.6 ml (292.5 mmol) ethyl acetate was-added slowly while stirring. A strongly exothermic reaction was observed. Stirring was continued for 10 min without cooling. After cooling to about 0° C., 45.8 g (142.7 mmol) tri(n-butyl)stannyl-methanolate have been added dropwise while stirring. Stirring was continued for 2 d at 4° C. After addition of 112.9 g methanol stirring was continued for 1 h at ambient temperature. The reaction mixture was poured into 250 ml of water, extracted thrice with 150 ml diethyl ether each, the combined extracts were washed twice with 80 ml of water each, then once with 40 ml saturated aqueous sodium chloride solution, dried with sodium sulfate and concentrated in vacuo. Yield 48.6 g oil, which have been purified by chromatography on 300 g silica gel with hexane/MTBE (10:1). Final yield 34.6 g (67%) oil. δ=0.90 (m); 1.30 (m); 1.50 m); 1.97 (s); 4.02 (t); 6.27 (t).